Hand Knurling Machine Die Cutting Machine for Crafts & Card Making (Blue)

Material: Plastic + Alloy
Model Number: HKCLL469A000
Product weight: 6000g
Product size: 21.6*28*13.1cm （8.64*11.2*5.24 inches)
Product package size：28.5*15.4*25.5cm（11.4*6.16*10.2inches）
Maximum cutting size: Die size within 280*150mm（11.2*6 inches）
Color: Blue
Cut paper thickness：80-250g
Package Included: 
1 X A Plastic Cushion Plates
1 X B Plastic Cushion Plates
1 X Translucent board
1 X Manual 

About product：
Excellent quality embosser and die cut machine with a built in suction system ,sturdy and durable.
Works well with any standard Wafer thin/etched dies, embossing folders, texture plates, and contour steel rule dies.
Cuts and embosses lots of materials including tissue paper, foils, acetate ribbon, thin leather, and more.
4 Suction Cups-4 suction cups on the bottom will help the machine stick firmly to a smooth work surface.

Fault handling：
The knurling machine must be placed on a flat workbench; the knurling operation can only be performed after the standby unit is stable. Maximum knurled size
In theory, it is possible to cut patterns that are less than or equal to the length and width of the backplane
Applicable knife type
Refer to the thickness (g) of the paper to be cut to select the corresponding blade
Not completely cut during knurling
1. Adjust the cutting pressure appropriately according to the thickness of the cutting material;
2. Check whether the backplane is in good condition; if the backplane is damaged, it will affect the use; replace the backplane in time;
3. Reduce the speed of the rocker arm; shake the rocker arm at a constant speed;
4. Check whether the blade is not sharp; if the blade is damaged, please replace the blade in time.
Abnormal noise during knurling
1. Check the combined thickness of the back plate and the knife plate;
2. Light shaker; check whether the internal parts fall off and contact after-sales
Note that when the total thickness of the bedknife module is too thick to pass the knurling machine; do not force the operation; so as not to damage the knurling machine; the parts that have passed need to shake the rocker arm in the opposite direction to exit the knurling machine.

Please note:
1.Due to different monitor , the picture color maybe have a little different from real color.
2.Please allow 1-3cm measurement deviation due to manual measure.